Dual Tilt Mount Solar Module Compatibility - RV Solar Connection

RVSC Dual Tilt Mount Solar Module Compatibility Chart

RVSC Dual Tilt Solar Panel Mounts are adaptable to virtually any solar module manufacturers frame.

Medium mount
If your solar module is not listed in the table below measure the mounting holes. If the mounting holes are between 15.38" to 24.38" apart the RVSC dual tilt mount will fit your solar module without drilling. Mounting the RVSC Dual Tilt Mount to the end rails of the module is recommended on modules 25" or longer.

In some cases new 1/4" holes may have to be drilled in either the modules frame or the dual tilt mount.
The modules listed below are modules commonly used in the RV industry.

Printer friendly version Medium Mount-

RVSC Dual Tilt Solar Module Mount - Medium Mount Compatibility

Module Brand	Model Number	Wattage	Fits Medium Mount	Requires Drilling	End Rail Mounting
All specifications are based on information provided from module manufacturers spec sheets.

AM Solar	AM-100	100	Yes	No	Optional

BP	SX-330	30	Yes	No	Optional
BP	BP340	40	Yes	No	Optional
BP	BP350	50	Yes	No	Optional
BP	BP375	75	Yes	No	Optional
BP	BP380	80	Yes	No	Optional

Carmanah	CTI-50	50	Yes	No	Optional
Carmanah	CTI-80	80	Yes	No	Optional
Carmanah	CTI-95	95	Yes	No	Optional
Carmanah	CTI-110	110	Yes	Yes	Required

CDT	CDT20	20	Yes	No	Optional
CDT	CDT40	40	Yes	No	Optional
CDT	CDT50	50	Yes	No	Optional

GEPV	GEPV-050-M	50	Yes	No	Required
GEPV	GEPV-110-M	110	Yes	Yes	Required

Kyocera	KC40T	40	Yes	No	Required
Kyocera	KC50T	50	Yes	No	Required
Kyocera	KC65T	65	Yes	No	Required
Kyocera	KC85T	85	Yes	No	Required
Kyocera	KC130TM	130	Yes	No	Required

Mitsubishi	PV-MF110EC3	110	Yes	No	Required
Mitsubishi	PV-MF110EC4	120	Yes	No	Required

Sharp	NE-80EJEA	80	Yes	No	Optional
Sharp	ND-123EJEA	123	Yes	No	Required
Sharp	ND-LE1U	123	Yes	No	Required
Sharp	ND-130UJF	130	Yes	No	Required

Solartech	SMP040P	40	Yes	No	Optional
Solartech	SMP045P	45	Yes	No	Optional
Solartech	SMP050P	50	Yes	No	Optional
Solartech	SMP055P	55	Yes	No	Optional

Suntech	STP080S-12/Bb-1	80	Yes	No	Optional
Suntech	STP085S-12/Bb-1	85	Yes	No	Optional

Sunwize	OEM40	50	Yes	No	Optional
Sunwize	SW50A	50	Yes	No	Optional
Sunwize	SW55A	55	Yes	No	Optional
Sunwize	SW60A	60	Yes	No	Optional
Sunwize	SW75A	75	Yes	No	Optional
Sunwize	SW80A	80	Yes	No	Optional
Sunwize	SW85	85	Yes	No	Optional
Sunwize	SW90	90	Yes	No	Optional
Sunwize	SW90C	90	Yes	No	Optional
Sunwize	SW95C	95	Yes	No	Optional
Sunwize	SW100C	100	Yes	No	Required
Sunwize	SW100	100	Yes	No	Required
Sunwize	SW115	115	Yes	No	Required
Sunwize	SW120	120	Yes	No	Required

RVSC Dual Tilt Solar Module Mount - Large Mount Compatibility

Medium mount
If your solar module is not listed in the table below measure the mounting holes. If the mounting holes are between 16.25" to 25.50" apart the RVSC dual tilt mount will fit your solar module without drilling. Mounting the RVSC Dual Tilt Mount to the end rails of the module is manditory on all large modules.

In some cases new 1/4" holes may have to be drilled in either the modules frame or the dual tilt mount.
The modules listed below are modules commonly used in the RV industry.

Printer friendly version Medium Mount-

Module Brand	Model Number	Wattage	Fits Large Mount	Requires Drilling	End Rail Mounting
All specifications are based on information provided from module manufacturers spec sheets.

BP	BP365	65	Yes	No	Optional
BP	BP3110	110	Yes	No	Optional
BP	BP3115	115	Yes	No	Optional
BP	BP3125	125	Yes	No	Optional
BP	BP3130	130	Yes	No	Optional
BP	BP3135	135	Yes	No	Optional
BP	SX-3130	130	Yes	No	Optional
BP	SX-3140	140	Yes	No	Optional

Kyocera	KD135SX-UPU	135	Yes	No	Optional
Kyocera	KD135GX-LPU	135	Yes	No	Optional
Kyocera	KD135GX-LP	135 Discontinued	Yes	No	Optional

RVSC Dual Tilt RV Solar Panel Mount